Film/feuille PVC

RALLYCHEM engineers have extensive experience in the use of polar polyester waxes and oxidized polyethylene waxes as internal and external lubricants to effectively avoid segregation and improve printability. At the same time, it does not affect the transparency, which is suitable for products with high transparency requirements, such as PVC heat-shrinkable film and PVC transparent sheet.

Sur mesure

Nos avantages

Avantage en termes de performances

Applicable to Transparent Products
Tougher, Less Exudation
Avantage en termes de coûts

Reduces Mold Clearing Frequency, Lowering Costs
Avantage de la production

Prolongs Start-up Time
Low Impact on Printing Performance

Produits apparentés

Homopolymère de polyester

RLWAX

Indice d'acidité mg KOH/g

Humidité %

Avantages

Série RS-500

15-29

<1.8

For PVC edge banding, replace CPE, better toughness, increase CaCO3 dosage to reduce cost

Cire polyester

RLWAX

Point de chute ℃

Indice d'acidité mg KOH/g

Avantages

Cire de polyéthylène

RLWAX

Point de chute ℃

Viscosité cps

Avantages

Série RL-1002

110-118

20-60 @ 140℃(284℉)

High drop point and low viscosity, good demolding with prolong processing time

Cire OPE haute densité

RLWAX

Point de chute ℃

Indice d'acidité mg KOH/g

Viscosité cps

Avantages

RL-916A

140

17

10,000@150°C

Increase fusion speed with super metal peelability, good for transparent products

Cire OPE à faible densité

RLWAX

Point de chute ℃

Indice d'acidité mg KOH/g

Viscosité cps

Avantages

RL-6882

110

10

20 @ 140°C(284℉)

Excellent fluidity and anti precipitation, improving production speed and capacity

Industrie d'application

Tuyauterie industrielle en CPVC

Tuyau d'incendie CPVC

Tuyaux d'eau chaude et froide en CPVC

Conduit en PVC

PVC National Standard Drain Pipe

Produits souples en PVC

Produits en mousse de PVC

Tuyaux et profilés en PVC

Panneau de sol/mur en PVC

Stabilisateur thermique pour PVC

Plus d'informations

Questions fréquemment posées

Why do you get plate-out in high-speed calendering or blown film?
+

Same story: high shear and heat push low-compatibility, low-MW additives to migrate or volatilize. Use polar polyester waxes plus polyester homopolymers to improve compatibility and melt stability, so less buildup and longer time between die cleanups.
How do you toughen films/sheets without making them gummy?
+

Polyester homopolymers create tiny energy absorbers, lifting elongation and tensile strength, improving impact and crack resistance.

· For clear grades, go low-color, low-VOC.

· Pair with polar polyester wax for stable processing and a clean surface.
Will additives mess with printing?
+

Internal polar polyester waxes (low VOC, low migration) reduce surface oiliness and actually help ink adhesion compared to typical non-polar lubes. Still, do your surface treatment/cleaning and run an adhesion test.

Rallychem Chemicals vous fournira des services de conseil professionnel, des services de solutions personnalisées pour le PVC/CPVC, des additifs de cire, des émulsions de cire, des services de production personnalisée de micro-polymères, n'hésitez pas à nous contacter.

Nous contacter

Film/feuille PVC

Nos avantages

Avantage en termes de performances

Avantage en termes de coûts

Avantage de la production

Produits apparentés

Homopolymère de polyester

Cire polyester

Cire de polyéthylène

Cire OPE haute densité

Cire OPE à faible densité

Industrie d'application

Questions fréquemment posées

Why do you get plate-out in high-speed calendering or blown film?

How do you toughen films/sheets without making them gummy?

Will additives mess with printing?