PVC pipes, conduits, and profiles are processed at temperatures high enough to trigger thermal degradation. That’s why heat stabilizers are non‑optional in PVC processing: they protect the polymer during extrusion and help maintain long-term performance.

But in real production, “stabilization” is not only about chemistry. A stabilizer package must also deliver processing stability, metal release, and clean surface quality—and this is where wax additives (lubricant waxes) play a critical role.

Why heat stabilizers are critical in PVC pipe and profile extrusion

When PVC is heated during extrusion (commonly ~160–200°C depending on formulation and equipment), it can undergo dehydrochlorination (release of HCl). If not controlled, it causes:

• Color shift(white/bright → yellow → brown/black)
• Loss of molecular weight, leading to brittleness and reduced impact strength
• Process instability(torque rise, melt fracture, rough surfaces)
• Equipment corrosion riskfrom released HCl
• More deposits/plate-outwhen degraded residues and incompatible components accumulate

For pipe and conduit applications, stabilizers help processors maintain:

• long-term mechanical performance (impact, pressure resistance)
• consistent appearance and surface quality
• reliable, repeatable processing windows

Why wax additives are important inside stabilizer packages

Most commercial PVC stabilizer packages are designed as multi-component systems. Besides the stabilizer actives, they often include co-stabilizers and lubricants—and waxes are widely used because they can strongly influence the processing window.

What wax additives do in the line (practical effects)

Properly selected wax additives can help:

• Control fusion (gelation) behavior: avoid underfusion (rough surface, poor strength) and overfusion (thermal stress, discoloration risk)
• Reduce friction and stickingat metal surfaces (barrel/screw/die), improving metal release
• Stabilize melt flow: smoother output, fewer surges, more consistent dimensions
• Reduce plate-out / die build-upin many formulations by improving compatibility and flow behavior (needs validation by trials)
• Improve surface finish(gloss/cleanliness) and reduce defects linked to poor lubrication balance

Internal vs. external lubrication (why balance matters)

In rigid PVC, processors typically need a balanced internal/external lubrication profile:

• Internal lubricationhelps reduce polymer–polymer friction and supports melt flow.
• External lubricationhelps reduce polymer–metal friction for release and surface quality.

Wax chemistry (molecular weight, melting/softening point, polarity) influences where a wax sits on this spectrum. An imbalanced system may show:

• early slip / poor fusion (too much external)
• high torque / sticking / die build-up (too little external)
• haze/printability issues or downstream adhesion risks (overlubrication in some products)

Typical wax types used in PVC stabilizer packages (selection logic)

Depending on the stabilizer system and the target product, wax additives may include:

• Polyethylene wax (PE wax): processing lubrication and flow control
• Oxidized polyethylene wax (OPE wax): added polarity can improve compatibility in certain PVC systems
• High-melting synthetic waxes(e.g., FT-type): higher hardness and thermal resistance in demanding windows
• Functional wax blendstuned for pipe/profile extrusion

Selection should be based on: fusion window, torque curve, melt pressure stability, die cleanliness, surface finish, and downstream requirements.

Conclusion: The Rallychem Advantage

Rallychem’s lubricants are the perfect match for PVC heat stabilizers.

We offer high-performance and cost-effective lubricants, as well as customized functional targeting lubricants to better fit the producer’s specific stabilization system. Whether for highly filled PVC or PVC transparent products, RALLYCHEM can help achieve a wider processing window.

Key Benefits of Rallychem Wax Additives:

1 Enhanced Stability: Improves both dynamic and static stability of stabilizers, obtaining better whiteness.

2 Wider Processing Window: Reduces the risk of degradation during temperature fluctuations.

3 Plate-out Control: Effectively reduces precipitation and die build-up.

4 Superior Surface Finish: Improves mold release for an excellent surface effect.

5 Consistency: Delivers good batch-to-batch stability for reliable production.