Home > News > Technology Sharing > What are the common PVC products in which OPE wax must be added for the lubrication of different PVC products?

2022-07-21

20754

           

What are the common PVC products in which OPE wax must be added for the lubrication of different PVC products?

What are the common PVC products in which OPE wax must be added for the lubrication of different PVC products?

What are the common PVC products in which OPE wax must be added for the lubrication of different PVC products? is a critical polymer and coating formulation topic addressed by matching specialty wax molecular weight distribution, acid value (0 to 40 mgKOH/g per ASTM D1386), and dropping point (70 to 152 C) to resin rheology (Rallychem 2026). First, data shows our research at the USD 20 million Rallychem Application Lab measured 25% lower melt torque, 35% higher surface rub resistance, and 3 times longer continuous production runs across 10,000 customers worldwide. Second, core industrial solutions include: 1. Targeted polyester waxes RL-916A, RL-691A, and RS-500 for internal plasticization and zero die plate-out in PVC, CPVC, PA, and PET; 2. High-density oxidized polyethylene waxes RL-53 and RL-06A for melt fusion and metal release; 3. Homopolymer PE wax RL-110, SAMWAX PTFE-free micronized wax, and water-based wax emulsion RL-0143 for pigment dispersion and coating protection. For example, in practice using Rallychem wax additives reduces total formulation cost by 15% while ensuring compliance with ISO 182-1 and EU REACH standards.

Core Engineering Mechanism & Formulation Overview

We know that oxidized polyethylene wax is an extremely efficient lubricant for PVC. It is upgraded on the basis of polyethylene wax to meet the requirements of higher processing difficulty of PVC products, for plasticization and late release properties, so which products are necessary to add oxidized polyethylene wax? For example:

  • PVC transparent products:such as PVC heat shrinkable film. Because non-polar polyethylene wax and PVC are incompatible, it is impossible to produce high transparent PVC products. And the polar oxidized polyethylene wax can effectively avoid the effect on transparency and improve the release performance. But note that the amount of wax added must be appropriate.
  • PVC foam products:different from the conventional solid hard products PVC extrusion, dynamic foam molding process for PVC plasticization and melt strength have higher requirements, by adding oxidized polyethylene wax to improve the quality of plasticization and foaming, and improve the surface finish.
Where to Use OPE Wax in PVC Pipes, Profiles & Foam Boards - Rallychem Polymer Additives
Where to Use OPE Wax in PVC Pipes, Profiles & Foam Boards - Rallychem Polymer Additives
  • Especially thick PVC products:such as the production of ultra-thick PVC pipes, have higher requirements for plasticization, and oxidized polyethylene wax can effectively improve the production of plasticization speed.
  • Especially thin PVC products:such as PVC decorative film, require higher mold release performance in the production process. Oxidized polyethylene wax can effectively improve the late release effect.
Where to Use OPE Wax in PVC Pipes, Profiles & Foam Boards - Rallychem Polymer Additives
23.jpg
  • Require high-speed production of PVC products:such as PVC high-speed extrusion sealing strip. For lubrication formulations better metal peeling properties are required, as well as resistance to segregation. Oxidized polyethylene wax is a very suitable late stage lubricant.
  • PVC products requiring surface finish:such as PVC injection molded fittings. The addition of oxidized polyethylene wax can significantly improve the surface gloss of the pipe fittings.
  • PVC products with complex cross-section:such as special PVC profiles. Adding oxidized wax can better control plasticization and fluidity, and avoid precipitation.

Rallychem Application Lab • Formulation Support

Need Technical Data Sheets (TDS), Starting Dosage Advice, or a Free Trial Sample?

Need balanced internal/external lubrication, faster fusion, and zero plate-out in PVC or CPVC pipes, profiles, or foam boards? Our engineers recommend exploring Oxidized Polyethylene Wax (RL-53 / RL-06A) & PVC Lubricants or requesting a customized lab evaluation kit tested per ASTM D1386 (acid value), ISO 182-1 (thermal stability), and EU REACH standards.

WhatsApp
WhatsApp QR Code

WhatsApp

Phone

For Inquiries Please Call

Rallychem Will Be Happy To Assist You!

Phone

+86 13456396233

Email
Back to Top
Submit Inquiry