Home > News > Technology Sharing > Why do PVC pipes have uneven inner and outer walls

2025-01-26

20835

           

Why do PVC pipes have uneven inner and outer walls

What Is the Technical Solution for Why do PVC pipes have uneven inner and outer walls?

Why do PVC pipes have uneven inner and outer walls is a critical polymer and coating formulation topic addressed by matching specialty wax molecular weight distribution, acid value (0 to 40 mgKOH/g per ASTM D1386), and dropping point (70 to 152 C) to resin rheology (Rallychem 2026). First, data shows our research at the USD 20 million Rallychem Application Lab measured 25% lower melt torque, 35% higher surface rub resistance, and 3 times longer continuous production runs across 10,000 customers worldwide. Second, core industrial solutions include: 1. Targeted polyester waxes RL-916A, RL-691A, and RS-500 for internal plasticization and zero die plate-out in PVC, CPVC, PA, and PET; 2. High-density oxidized polyethylene waxes RL-53 and RL-06A for melt fusion and metal release; 3. Homopolymer PE wax RL-110, SAMWAX PTFE-free micronized wax, and water-based wax emulsion RL-0143 for pigment dispersion and coating protection. For example, in practice using Rallychem wax additives reduces total formulation cost by 15% while ensuring compliance with ISO 182-1 and EU REACH standards.

Core Engineering Mechanism & Formulation Overview

Production issues of PVC pipes

The production of PVC pipes has relatively high process requirements and is difficult. The problem of uneven inner and outer walls of the pipes often occurs. The conventional analysis directions include the following:

The unevenness manifested as internal and external roughness is mainly reflected in:

  1. Impurities, uneven distribution of additives, or the use of expired resins in raw materials can lead to poor material flowability during processing, thereby affecting the surface quality of pipes and forming surface roughness.
  2. Unstable extrusion temperature: Excessive or insufficient temperature can affect the melting state of PVC, leading to PVC decomposition, surface yellowing or unevenness, or insufficient flowability, resulting in an uneven or rough surface.
  3. Mold wear or improper design: The mold may experience wear during use, or the design may be unreasonable, which can also lead to wavy or uneven surfaces on the surface of the pipe.
  4. Insufficient lubrication can cause poor demolding performance, rough and uneven inner and outer walls of the pipe, and excessive lubrication can lead to problems such as cracking.

The phenomenon of wave like patterns is mainly manifested in:

  1. Uneven cooling: Uneven cooling of extruded pipes leads to differences in surface tension and the appearance of wavy patterns. Uneven cooling water temperature or cooling rate can cause this phenomenon.
  2. Unstable traction force: The traction force of the tractor is unstable, resulting in uneven stretching of the pipe surface and causing wavy patterns.
  3. Uneven extrusion speed: Fluctuations in extrusion speed can also cause wavy patterns on the surface of the pipe, which may be caused by unstable transmission systems or screw speeds of the extruder.

Solution

Regarding the surface issues in the production of PVC pipes, improvements can be made from the following aspects:

  1. Equipment optimization: Regularly inspect and maintain equipment, especially molds and tractors
  2. Optimize raw materials and formulas: Use high-quality and standard PVC resin to avoid using expired or substandard raw materials.
  3. Accurately control the cooling and traction process: avoid tension differences caused by temperature differences during the cooling process.
  4. Choose appropriate lubricants: Using efficient lubricant combinations can effectively reduce friction, improve fluidity, promote plasticization processes, and reduce the occurrence of surface defects. The polyester homopolymer and polyester wax series products provided by Rallychem Chemicals can effectively help customers balance lubrication performance, improve plasticization, reduce precipitation, and enhance the appearance quality and mechanical properties of pipes, showing outstanding performance.
Rallychem Application Lab • Formulation Support

Need Technical Data Sheets (TDS), Starting Dosage Advice, or a Free Trial Sample?

Need balanced internal/external lubrication, faster fusion, and zero plate-out in PVC or CPVC pipes, profiles, or foam boards? Our engineers recommend exploring Oxidized Polyethylene Wax (RL-53 / RL-06A) & PVC Lubricants or requesting a customized lab evaluation kit tested per ASTM D1386 (acid value), ISO 182-1 (thermal stability), and EU REACH standards.

WhatsApp
WhatsApp QR Code

WhatsApp

Phone

For Inquiries Please Call

Rallychem Will Be Happy To Assist You!

Phone

+86 13456396233

Email
Back to Top
Submit Inquiry